|
Silo
Accessories
POLY
SILO HOPPER
Specifications
Installation Instructions
Specifications
| High-strength polyethylene is lightweight and much more durable than steel or fiberglass - used for years in heavy duty applications. Thick walled hopper is extra tough - immune to silage acids - resists heat, cold, sunlight and warpage. |
 Exclusive 3-piece design. Connecting ring holds bottom to top - provides for 220° rotation of hopper bottom. Bottom can be quickly swiveled to right or left using two, steel handles attached to hopper bottom. |
 Three sizes available to fit most silo chutes: Small, Medium or Large |
Installation Instructions
| Two, rugged steel guide legs provide solid support for hopper. Lag legs to concrete with one-piece masonry anchor bolts (3/8"D x 1-7/8"L) equipped with expandable sleeves (furnished). Use masonry bit same diameter as anchors and drill holes 1/4" deeper than anchors. Insert anchors and tap until heads are flush with guide legs. Tighten heads 3 to 4 full turns or until resistance is felt. Or use J-bolts with nuts. Hook J-bolts around silo rings and bolt to guide legs. Leg hole spacing can be varied somewhat to fit different width silo rings by pushing on guide legs. |