|
|
Silo
Accessories
POLY
SILO CHUTE LINER
Extends
Life Of Rusted-Out Silo Chutes
Super-Tough, Low-Cost Poly Won't Rust or Crack -
Even at Extreme Temperatures!
-
An
economical and easy way to repair rusted out silo chutes
-
Simply
unroll and pull up silo for seamless one-piece, economical
installation
- Slick, smooth
surface provides fast feed discharge - prevents feed
hangup - silage won't cling to finish
- White poly liner
will function for chute skylights... by cutting 12" square holes
in steel chute every 6'
- Poly liner
is extremely tough - resists cold, and warpage. UV stabilized
to help withstand sunlight (through holes in old chute)
-
High-strength
polyethylene (pronounced poly-ethel-lean) is lightweight
and much more durable than steel or fiberglass
- Long-Life,
high-density poly is non-porous - resists moisture, silage
acids, feed additives and other chemicals
-
Superior
performance has been proven - used for years in heavy-duty
industrial applications (meets FDA Regulation 121.2501)
-
Use
a chalkline and strike a center line from the
top to the bottom of the chute.
-
Mark the center on both the top and bottom end
of each liner.
-
Beginning at the bottom of chute, install first
liner, Line up center markings on liner with
chalkline on chute.
-
Secure liner to chute using standard 3/4" length
self-drilling and tapping, hex-head screws as
required - insert through liner into chute using
a screw gun (liner can also be pop-riveted
to silo chute).
- Install screws
about every 8" to 10" along both sides of liner.
-
Install remaining liners, lapping joints 1"
in direction of feed flow
(to prevent feed hangup).
-
Cut top piece of liner, if required, using any
standard power or hand saw.
|
|
Item
No.
|
Description
|
Thickness
|
Width
|
Length
|
U/M
|
Approx.
Ship Wt.
|
Selling
Price
|
| PCL164848 |
Poly
Silo Chute Liner |
1/16"
|
4'
|
48'
|
roll
|
70
lbs.
|
$188.00
|
| F752030B |
Hex-Head,
Self-Drilling & Tapping Screw |
#10
x 3/4"L
|
-
|
-
|
box-50
|
1
lb.
|
10.00
|
|