• Reduces chain stretching, increases chain life, lowers energy consumption up to 30%
• Dampens noise - slick surface prevents sticking and absorbs sound
• Saves costly gutter-bottom rebuilding if liner installed when chain replaced
• 1/4" thickness required. Line gutter bottom only
• 90° corner liner available for 16" or 18" gutter
• Some budget buyers use 6-7/8" in 16" gutters or 8-7/8" in 18" gutters vs full width - they position liner under the chain and part of the flight, with good results
• Overlap sections 2", but lag the front end of each bottom section only.
• Install 1/4" dia. x 1-1/2"L steel drive anchors with counter-sinking flat heads (1-piece expansion bolts). Locate fasteners every 2" along front end, staggering fasteners 1" and 1-1/2" from front edge (for better gripping should cement condition vary).
• Note: Run new barn cleaner chain one week before installling poly, or check each flight and grind off rough edges

Many Uses
     Mangers
     Feed Bunks
     Conveyors
     Barn-Cleaner Chute
     Manure Spreaders
     Dump Trucks

Selecting the Right Thickness... Width... Length

General Installation Tips

Poly Holddowns... Fasteners