Loyal - Roth Manufacturing

CONVEYOR LINER
Note: Read "Selecting the Right Thickness... Width... Length"

Item No.	Width	Stock Lengths	Color	Unit of Measure	Approx. Ship Wt.	Selling Price
1/4"
PL1467850W	6-7/8"	50'	White	Roll	35 lbs.	$ 171.45
PL14678100W	6-7/8"	100'	White	Roll	70 lbs.	342.90
PL1487850W	8-7/8"	50'	White	Roll	45 lbs.	193.85
PL14878100W	8-7/8"	100'	White	Roll	90 lbs.	387.70
PL14107850W	10-7/8"	50'	White	Roll	55 lbs.	275.65
PL141078100W	10-7/8"	100'	White	Roll	110 lbs.	551.30
PL14127850W	12-7/8"	50'	White	Roll	65 lbs.	305.85
PL141278100W	12-7/8"	100'	White	Roll	129 lbs.	611.70

Nonstock Lengths: Add $12 net per cut

CONVEYOR-LINER FASTENER KIT

Item No.	Description	Selling Price
E709	Conveyor-Liner Fastener Kit (4-countersinking, flathead bolts & locknuts)	$ 8.30

INSTALLATION INSTRUCTIONS

Read "General Installation Tips"
Cut pan liner to length of pan, less 1/16" per foot (up to 2" max), to allow for expansion.
Notch liner for idler and drive sprockets.
Drill liner and pan on intake end only, per above drawing.
Fasten liner to pan (at intake end only), using 4-countersinking, flathead bolts and locknuts. See "Conveyor-Liner Fastener Kit"
Bevel front-edge of liner back 3/4", using a hand grinder or file, so flights don't catch on liner.
Bend (hammer) down intake end of pan as required, to allow flight clearance for additional height of liner.

Important: Check entire length of elevator for adequate side clearance between liner and both sidewalls (1/16" on each side up to 13" wide, 1/8" on each side if over 13" wide). Grind or block-plane if needed, so liner can expand lengthwise without binding and humping.