|
Harrows
ATV
DISC HARROW
Stronger Construction - Compare & Save
Stronger Construction - Compare & Save
| Loyal
Offset-Style (Model No. DH02) |
Other
Brands |
| Larger
16"-diameter disc blades High-carbon steel/notched style - increased cutting action |
Smaller
14"-diameter disc blades Lower-carbon steel/plain style - decreased cutting action |
| Heavier
disc-harrow weight - approx. 430 lbs. - increased soil penetration - better ground cutting and chopping |
Lighter
disc-harrow weight - limited soil penetration - less ground cutting and chopping |
| Wider
7-1/2" spacing between blades - increased soil flow - less soil plugging between blades |
Narrow
spacing between blades - decreased soil flow - more soil plugging between blades |
| Adjustable
disc gangs (4-disc/gang) - three cutting angles... from 20° angle for aggressive cut/chop... to straight across for cultivation |
Non-adjustable
disc gangs - no cutting-angle adjustment for different ground conditions |
| Offset
front & rear disc gangs - increased stability and tracking -always cutting... no bounce or hop - more productivity per hour |
Non-offset
disc gangs - decreased stability and tracking - prone to bouncing & hopping - less productivity per hour |
| Disc-gangs mounted from larger 3" x 2" tube | Disc-gangs mounted from smaller 2" x 2" tube |
| Thicker, gang-axle brackets (double U-bolted) | Thinner, gang-axle brackets (non U-bolted) |
| Longer life, double-thrust, sealed, gang bearings | Shorter life, non-sealed, sleeve, gang bushings |
| Stronger 1" square, hi-carbon-steel, gang axles | Weaker 3/4" steel, gang axles |
| Heavier 2" square-tube, main frame | Lighter main frame |
| Stronger triangle-shaped hitch | Weaker straight-line hitch |
| Rotating
1-7/8" ball-coupling hitch - relieves twisting pressure on ATV bumper when disc pivots at ball during use |
Non-rotating
draw-pin hitch - creates twisting pressure on ATV bumper when disc pivots at hitch during use |
| Easy-adjust,
cutting-depth-control wheel - adjust cutting depth for ground ground conditions |
No
cutting-depth-control wheels - no adjustment for ground conditions |
| 1-step
to convert from work to transport position Mechanical easy-pull ratchet quickly lowers wheels from work to transport position - no need to unhook disc from ATV - no manual lifting and flipping required |
6-steps
to convert from work to transport position No mechanical ratchet - operator must: 1) remove weights from disc, 2) unhook disc from ATV, 3) manually lift disc, 4) flip disc-harrow over onto disc blades, 5) rehook disc to ATV, 6) add back weights |
| Bigger,
heavier tires - 13" O.D., 4-ply... heavier 1" bearings |
Smaller,
lighter tires - 12" O.D., 2-ply... lighter 3/4" bearings |
| Heavier 1" wheel axles mounted on 2" x 3" tube | Lighter 3/4" wheel axles mounted on 1-1/2" x 3" tube |
| Powder-coated
paint finish - better rust resistance - longer life |
No
powder-coated paint finish - less rust resistance - shorter life |