|
Replacement
Conveyor Belting
Belt Top Surfaces
PVG BELTING (Extra-Cold-Temperature — to minus 40°)
Greater Chemical & Cracking Resistance than PVC
FASTENER KITS & LACING TOOLS
*Includes hinge
plates with pre-inserted staples, hinge pins and washers.
Note: Use #125 Staples for 100 to 150 P.W.I. (rated strength per inch of width) belt.
How to convert traditional C187 Tool to install new Ready-Set™
Fastener Hinges (with pre-inserted staples).
Belt Top Surfaces
 |
 |
|
Smooth-Top
|
Crescent-Top
|
PVG BELTING (Extra-Cold-Temperature — to minus 40°)
Greater Chemical & Cracking Resistance than PVC
| Item
No. |
Description |
Weight
per Running Foot |
Selling Price |
| QUANTITY DISCOUNT - 600' or more of any one size and type | |||
| CUTTING CHARGE (applied to all orders under 600') | $
28.95 |
||
| BTSMPVG12012__ | 12"
PVG 120 Smooth Conveyor Belting |
.84
lbs. |
$
6.10 |
| BTSMPVG12014__ | 14"
PVG 120 Smooth Conveyor Belting |
.98
lbs. |
6.90 |
| BTSMPVG12016__ | 16"
PVG 120 Smooth Conveyor Belting |
1.12
lbs. |
7.30 |
| BTSMPVG12018__ | 18"
PVG 120 Smooth Conveyor Belting |
1.26
lbs. |
8.10 |
| BTSMPVG12020__ | 20"
PVG 120 Smooth Conveyor Belting |
1.40
lbs. |
8.95 |
| BTCRPVG12012__ | 12"
PVG 120 Crescent Conveyor Belting |
1.08
lbs. |
$
6.45 |
| BTCRPVG12014__ | 14"
PVG 120 Crescent Conveyor Belting |
1.26
lbs. |
7.30 |
| BTCRPVG12016__ | 16"
PVG 120 Crescent Conveyor Belting |
1.44
lbs. |
8.10 |
| BTCRPVG12018__ | 18"
PVG 120 Crescent Conveyor Belting |
1.62
lbs. |
9.30 |
| BTCRPVG12020__ | 20"
PVG 120 Crescent Conveyor Belting |
1.80
lbs. |
10.15 |
FASTENER KITS & LACING TOOLS
 |
Installation Tool (RSC187-6) holds fasteners securely on the belt and in proper alignment while guiding staples as they are driven. It also provides an anvil surface for initial clinching of the staples. |
 |
Installation
Tool (RSC187-6) is designed for new-style (RS) Ready-Set™
Fastener Hinges - staples have been pre-inserted in hinge top
plate. You can easily convert your traditional C187 tool by ordering No. ST5-5 Blocks below (see page bottom). |
 |
INSTALLED
LACING
illustrated |
| Item
No. |
Description |
U/M
|
Selling Price |
| RE-RSTK4-6 |
Rent — belt-lacing installation tool kit (RSTK4-6) - no charge for in-transit days, Sundays or holidays | per
day |
$ 25.00 |
| RS300 |
Instruction Sheet - belt installation illustrated | each |
No Charge |
| RSC187-6 |
Tool for #62, #125 & #187 - 6" spliced in one move | each |
399.35 |
| RS125SJ12NCS |
#125 Alligator Fastener Kit* - stainless 12" | (4
per box) |
185.10 |
| RS125SJ14NCS |
#125 Alligator Fastener Kit* - stainless 14" | (4
per box) |
224.00 |
| RS125SJ16NCS |
#125 Alligator Fastener Kit* - stainless 16" | (4
per box) |
253.20 |
| RS125SJ18NCS |
#125 Alligator Fastener Kit* - stainless 18" | (4
per box) |
282.50 |
| RS125SJ20NCS |
#125 Alligator Fastener Kit* - stainless 20" | (4
per box) |
311.70 |
| RS125SJ24NCS |
#125 Alligator Fastener Kit* - stainless 24" | (4
per box) |
360.40 |
| NCS1-X |
Extra Hinge Pins #125 - stainless (nylon covered) | 10
ft. |
64.30 |
| 125-RET-50 |
Extra Retaining Washer for #125 hinge pin | (50
per box) |
10.75 |
| ST5-5 |
Block,
RSC187 Lace-Tool Ready-Set Staple Guide - 2" W |
each |
25.30 |
Note: Use #125 Staples for 100 to 150 P.W.I. (rated strength per inch of width) belt.
How to convert traditional C187 Tool to install new Ready-Set™
Fastener Hinges (with pre-inserted staples).
 |
 |
 |
|
1.
Press down on steel clamp bar and unscrew cam lever. Remove
clamp bar.
Note: For C187 or C187-4 tools which do not have clamp bars, simply press down on guide block and unscrew cam lever. |
2.
Lift off old guide blocks (green) and replace with Ready-Set™
guide blocks (yellow). Replace clamp bar.
|
3.
Press down on clamp bar or guide block, insert cam lever and
tighten. Tool is properly adjusted when cam lever(s) is in "down
position" and guide block/comb assembly is flush on anvil
(see inset).
|
|
Galvanized Conveyors (Single-Chain) Poly Conveyor (18" Double-Chain) Replacement Conveyor Chain (Single & Double-Chain) Replacement Belting, Fastener Kits & Lacing Tools |