ATV Dump Trailers
ATV Harrows
ATV Manure Spreaders
ATV Speader/Seeders
Barn-Grooming Equipment
Calf Hutches
Calf Pens
Calf Warmers
Cow Mats & Mattresses
Feed Carts
Feed-Handling Systems
Foot Baths
Gutter Grates
Hay Bale-Elevator Systems
Poly Liner
Silo Accessories
Ventilation Equipment
Vinyl-Strip Doors

Catalog Request
Locate a Dealer
Upcoming Shows
About Us
Contact Us
Feed-Handling Systems
POLY CONVEYOR
(18" DOUBLE-CHAIN)
Price List

Item No.
Description
Selling Price
          STARTER UNIT - must be ordered
 D_ 
Starter Unit (includes drive and idler hardware - factory installed, plus V-belt; does not include any sections/footage).
Order motor, pulley & hopper separately - see below.
$ 827.00 
          SECTIONS - order as needed (recommended maximum elevator length - 80')
 D_
Conveyor Section (includes #62 detachable chain with poly flites, and poly guide rails for conveyor chain). Specify if drive, middle, or idler... and length... up to 10' - per foot
65.00 
          ACCESSORIES 
 DA100-10
Cover (10' sections)
110.00 
 DA200
Hopper (12" H x 24" L x 32" L)
116.00 
 DA300
Incline - factory installed on conveyor sections above
229.00 
 DA300K
Incline Kit - includes hardware and angles for on-site installation
156.00 
 DA400
Decline - factory installed on conveyor sections above
237.00 
 DA400K
Decline Kit - includes hardware and angles for on-site installation
108.00 
 DA500
Drop Out (18" W x 24" L)
- factory installed on conveyor sections above
116.00 
 DA500K
Drop Out Kit (18" W x 24" L)
- includes hardware for on-site installation
86.00 
 DA600
Two-way Discharge - factory installed
193.00 
 DDC62_
Replacement Double Chain - #62 with poly flites
(1-1/2" H x 1/2" T x 14-1/2" W) - per foot
18.50 
TDA850-1
Additional Baffle - factory installed - per foot of conveyor
7.00 
 
TAPERBOARD FEEDERS
 
 TF_
Drive Unit and Idler (does not include any footage)
827.00 
 TF_B
Bottom Taperboard Feeder Section (includes chain) - per foot
70.00 
 TFA8001_
Solid Top for Bottom Taperboard Section with sides - per foot
20.00 
ELECTRIC MOTORS

  • Heavy-duty, Farm Rated, capacitor-start motors are
    totally enclosed and fan cooled (single-phase)
  • Manual reset for thermal protection
  • Prelubricated, double-shielded ball bearings
  • Both windings and grease effective at temperatures down to minus
    40° F
  • Motors supplied with slinger on shaft and gasketed conduit box
  • Rotation easily reversed
  • 1-year limited motor warranty
  • Motor cord & switch not included (purchase from your electrician). Wiring should be done by a qualified electrician in accordance with local and national codes.
     
Item
No.
H.P.
R.P.M.
Shaft

Frame
Size
Voltage
Approx.
Shipping
Weight
Selling
Price
 MT104
1
1725
5/8"
56
115/230
33 lbs.
$ 208.00 
 MT105
1-1/2
1725
5/8"
56 H
115/230
41 lbs.
259.00 
 MT106
2
1740
1-1/8"
182 T
115/230
66 lbs.
370.00 
 MT107
3
1740
1-1/8"
184 T
115/230
89 lbs.
447.00 
MOTOR PULLEYS (for above motors)

  • Heavy-duty single-groove motor pulleys
  • Precision cast and machined for perfect balance
  • Solid construction on fixed bore with hollow-head set screw and standard keyway

Item
No.
Description
Type
O.D.
Bore
Selling
Price
 AK28X5/8  Cast-Iron Pulley
A
2.8"
5/8"
$ 11.60 
 BK32X1-1/8  Cast-Iron Pulley with Hub
A/B
2.6"/3.0"
1-1/8"
34.80 

SELECTING THE RIGHT SIZE MOTOR
 Conveyor Length
Motor HP
 1' to 35'
1
 36' to 70'
1-1/2
 71' to 80' (A)
2
   (A) Recommended Maximum Length
WARNING: Electric motor must be totally enclosed, fan cooled and have a manual reset overload protector. Motor starting, stopping and motor reset controls must be located so that the operator has view of the entire operation. Wiring should be done by a certified electrician in accordance with local and national codes. Covers are required on all lower sections of conveyor located within 7' of floor or working level or within reach of people. Failure to heed could result in personal injury or death.