• Heavy-duty, Farm Rated, capacitor-start motors are totally enclosed and fan cooled (single-phase)
• Manual reset for thermal protection
• Prelubricated, double-shielded ball bearings
• Both windings and grease effective at temperatures down to minus
  40° F
• Motors supplied with slinger on shaft and gasketed conduit box
• Rotation easily reversed
• 1-year limited motor warranty
• Motor cord & switch not included (purchase from your electrician). Wiring should be done by a qualified electrician in accordance with local and national codes.

Frame
Size

• Heavy-duty single-groove motor pulleys
• Precision cast and machined for perfect balance
• Solid construction on fixed bore with hollow-head set screw and standard keyway

Item
No.

• Use when silage is fed directly from silo clean-chute tube - prevents silage spillover - reduces wind losses
  NOTE: Requires straight hopper - order separately below

• Use when elevator is being fed from two locations... or when clean-chute cover above is ordered
• 4-sided hopper easily snaps on at any point along elevator
• Illustrated with 1 flow-thru end. Order with 2 flow-thru ends if hopper installed at location following 1st intake hopper.

• 4-sided downspout controls discharge flow of material
• Directs material to where you want it
• Reduces wind losses
• Attaches directly to discharge end of elevator

• Use when dual-direction discharge of feed flow is required
• Permits feed to be diverted to a feed cart, second conveyor,
  alternate feeder or elsewhere
• Cable-pull permits control from remote location
• Diverter quickly attaches to discharge end of elevator
• Optional cover for shielding materials from rain and snow
• Note: Use on horizontal conveyors only

• Easily adjusts up to 40° angle
• Permits custom installations under or over obstacles
• 4' decline furnished with sturdier, angle-iron connecting joints
• Decline sections can be factory installed at any point along elevator
• Self-lubricating poly wear liner at hinge - for quieter, longer-life operation

Note: Declines furnished with chain and with poly liner for pan.

• Move your elevator with ease to exactly where you want it
• Transport can be quickly raised from towing position
• Sturdy, easy-to-operate hand winch features automatic-brake system for positive load control
• Furnished with boot hitch and extra-long 100" Type A belt for cross shaft to motor (since motor mount is generally moved far enough back toward boot end of elevator for 100" belt — provides better balancing of elevator on transport), plus 2-piece drive shield
• Slow-Speed models have ag-type 15" - 4-bolt wheels with regreasable, tapered roller bearings (rubber tires not included). Slow-Speed model max speed - 20 MPH