ATV Dump Trailers
ATV Harrows
ATV Manure Spreaders
Barn-Grooming Equipment
Calf Hutches
Calf Pens

Cow Mats & Mattresses
Feed Carts
Feed-Handling Systems
Foot Baths
Gutter Grates
Hay Bale-Elevator Systems
Poly Liner
Silo Accessories
Stock Tanks
Ventilation Equipment
Vinyl-Strip Doors

Catalog Request
Locate a Dealer
Upcoming Shows
About Us
Contact Us
HAY BALE-ELEVATOR SYSTEMS

Transports
With 15" - 4-Bolt Wheel Rims...RUBBER TIRES NOT INCLUDED.
HITCH NOT INCLUDED - See ACCESSORIES below

CAUTION: Do not mount a longer or shorter length elevator than recommended below on transport. Failure to heed may result in personal injury or death.

Item No.
Description
Approx. Weight
Selling Price
HST-10T
 Medium Duty Transport - 18' total length (fits only
 Hayrite HEC elevators 20' through 32' in length and  EHD elevators 24' through 30' in length). HITCH
 NOT INCLUDED See ACCESSORIES below
303 lbs.
$1,479.00 
HST-20T
 Heavy Duty Transport - 30' total length (fits only
 Hayrite HEC elevators 36' in length and EHD elevators  36' through 48' in length). HITCH NOT
 
INCLUDED See ACCESSORIES below
419 lbs.
1,886.00 
HST-40T
 Heavy Duty Transport - 40' total length (fits only
 Hayrite EHD elevators 54' through 60' in length). HITCH  NOT INCLUDED — See ACCESSORIES below
510 lbs.
2,287.00 

Accessories

(Automatic Kick-Off [model HST-1A] and Bale Chutes [models HST-5A and
HST-12A] are interchangeable with Miller, Smalley and Snowco Brands)

Item No.
Description
Approx. Weight
Selling Price
HST-10A
Transport Hitch (for 'Standard' HEC model elevators)
24 lbs.
$ 116.00
HST-15A
Transport Hitch (for 'Extra Heavy Duty' EHD model elevators)
24 lbs.
116.00
HST-1A
Automatic Bale Kick-off (for 'Standard' HEC model elevators) - less ropes
46 lbs.
357.00
HST-13A
Automatic Bale Kick-Off (for 'Extra Heavy Duty' EHD model elevators) - less ropes
46 lbs.
357.00
HST-5A
Bale Chute (grate-type...6' length)
46 lbs.
215.00
HST-12A
Bale Chute (pan-type with stand...4' length)
46 lbs.
200.00
HST-2A
Mow Hanger Chain Kit (with 24" long chain and hardware)
9 lbs.
58.00
HST-6A
Bale Side Rails (for 12' Extension...increases height approx. 3-1/2") Per Pair
12 lbs.
116.00
HST-7A
Bale Guides (increases height approx. 4") Per Pair
6 lbs.
62.00
HST-16A
Bale Arrangers Per Pair
27 lbs.
121.00
HST-17A
Connector Plates (for 'Standard' HEC model elevators) Per Pair
9 lbs.
71.00
HST-18A
Connector Plates (for 'Extra Heavy Duty' EHD model elevators) Per Pair
9 lbs.
71.00
HST-50A
Drive Drive Kit, 1/2 HP (for HEC-16M thru 24M or EHD-18M thru 24M. Includes motor w/pulley & 7" cord w/plug-115V)
26 lbs.
293.00
HST-51A
Drive Drive Kit, 3/4 HP (for HEC-16M thru 40M or EHD-18M thru 36M. Includes motor w/pulley & 7" cord w/plug-115V)
29 lbs.
327.60

ELECTRIC MOTORS

  • Heavy-duty, FARM RATED, capacitor-start motors are totally enclosed and fan cooled (single-phase)
  • TEFC (Total Enclosed Fan Cooled)...1-year limited warranty
  • Capacitor-start...Manual reset for thermal protection
  • Double-shielded ball bearings...Rotation easily reversed
  • Both windings and grease effective at temperatures down to minus 40° F
  • Motors supplied with slinger on shaft and gasketed conduit box
  • Motor cord & switch not included (purchase from your electrician). Wiring should be done by a qualified electrician in accordance with local and national codes.

Note: View Horsepower Requirements
 

Item No.
H.P.
R.P.M.
Shaft
Frame
Size
Voltage
Approx.
Shipping
Weight
Selling
Price
MT102
1/2
1725
5/8"
56
115/230
25 lbs.
$ 165.00 
MT103
3/4
1725
5/8"
56
115/230
29 lbs.
 212.00 
MT104
1
1725
5/8"
56
115/230
34 lbs.
225.00 
MT105
1-1/2
1725
5/8"
56 H
115/230
46 lbs.
275.00 
MT106
2
1740
1-1/8"
182 T
115/230
88 lbs.
452.00 

WARNING:
Electric motor must be totally enclosed, fan cooled and have a manual reset
overload protector. Motor starting, stopping and motor reset controls must be located so
that the operator has view of the entire operation. Wiring should be done by a certified
electrician in accordance with local and national codes. Covers are required on all lower
sections of conveyor located within 7' of floor or working level or within reach of people.
Failure to heed could result in personal injury or death.

 

MOTOR PULLEYS

  • Cast-iron...single-groove
  • Precision cast and machined for perfect balance
  • Solid construction on fixed bore with hollow-head set screw and standard keyway
Item No.
Description
Type
O.D.
Bore
Selling Price
+AK28X5/8
 Cast-Iron Pulley
A
2.8"
5/8"
$ 9.00 
BC32X1-1/8
 Cast-Iron Pulley with Hub
A/B
2.6"/3.0"
1-1/8"
 29.00 
+ Generally recommended for bale elevators

ELECTRIC MOTOR WITH PULLEY & CORD

  • Prewired with 7" cord with plug (115V)
  • Pulley assembled to motor
  • Select motor that matches your elevator in price chart below

 

REPLACEMENT CHAIN
(fully assembled — ready to go)

Item No.
Description
Unit
Approx.
Weight
Selling
Price
HC55
 No. 55 Steel Detachable Chain with raised links
 (every 24")
Per
Foot*
0.7 lbs.
$ 6.40 
HC62
 No. 62 Steel Detachable Chain with raised links
 (every 24")
Per
Foot**
1.0 lbs.
 8.29 
HB4-55
 No. 55 Raised Link only
Each
0.2 lbs.
 3.39 
HB4-62
 No. 62 Raised Link only
Each
0.3 lbs.
 4.90 
*  Available in 8', 12', 16', or 24' lengths
** Available in 12' and 24' lengths



Hay Bale-Elevator Systems
   Feature Chart - Standard vs. Extra Heavy Duty Hay Bale Elevator
   Accessories - Product Info
   Elevator Length Guide (Without Transport)
   Elevator Length Guide (With Transport)
   Horsepower Requirements - Horizontal and Incline Elevators
   Price List - Standard Duty Hay Bale Elevator
   Price List - Extra Heavy Duty Hay Bale Elevator